Disable port for action - scripting

[treese]

I have BFD routing enabled for monitoring a remote site, when the site is unavailable the route hit our FW and flow through VPN.  I’m looking for a way to run a script when BFD shows the link down and removes the routes for a script to disable the uplink to the fiber circuit so we can prepare for the link to come back up.  All help is appreciated.

Thank you

[SamPirok]

Thank you for letting me know. You should be able to do this by triggering a upm script based on a log message from the BFD when the session goes down. These articles don’t cover exactly what you’re doing, but they do cover similar procedures so I wanted to share in case they help:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-an-SNMP-trap-based-on-CPU-ut...

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-an-EXOS-switch-to-adminis...

[treese]

I have this mocked up in my lab right now.

[treese]

Yes, one are 1 set of DC440 stack and the other Black Diamond 8810 (dual Core - VRRP) between the fiber circuit are DC440’s.  Thank you

[SamPirok]

Hi Ted, I’m looking in to this for you but it would help to know what equipment line you’re using. Could you tell me a bit about which products you’re using to set this up?

[treese]

I can get similar result if I can get BFD routing to disable after taking action.  If anyone knows how to do this that would be great too.