RegEx for Cisco interface

[StephanH]

Hello,

for the comliance engine I have to find all interfaces not have a certain command line.

Here is a positive an a negativ example:

interface GigabitEthernet1/0/48
 description Test1
 switchport access vlan 830
 switchport mode access
 switchport voice vlan 310
 no cdp enable
!
interface GigabitEthernet1/0/49
 description Test2
 switchport mode trunk
 switchport nonegotiate
 queue-set 2
 mls qos trust dscp
 channel-group 1 mode active
 ip dhcp snooping trust

!

I am looking for an regex matching the hole interface 1/0/48 and NOT the interface 1/0/49.

The criterion should be, that all interfaces are found in which “mls qos trust dscp” is NOT present.

I tried  “interface GigabitEthernet\d{1,2}\/\d{1,2}\/\d{1,2}[\s\n\w-].*?(?:(?<!mls qos trust dscp)[\s\n\w-])*?!” but this regex match all interfaces and not only the 1/0/48.  But this is not working.

Any ideas?

[Miguel-Angel_RO]

Hi Stephan,

I think you’ll have to open a case at GTAC.

From my understanding the compliance engine will use python in the background and they seem to have the global flag active for the regex. This flag cannot be deactivated from within the regex.

Look at the following screenshots activting/deactivating the global flag:

Mig