Karthik,
Here's the snapshots of the configuration for Workstation:
Management adapter (edit VMnet1 subnet accordingly):
Esa0 adapter:
Esa1 adapter:
If you have several active ethernet adapters in your PC and want to specify one, configure esa0 to use VMnet0 and edit VMnet0 to use the connection you want:
Here's the snapshots of the configuration for Workstation:
Management adapter (edit VMnet1 subnet accordingly):
11.25.03_inline.png)
Esa0 adapter:
11.25.17_inline.png)
Esa1 adapter:
11.25.29_inline.png)
If you have several active ethernet adapters in your PC and want to specify one, configure esa0 to use VMnet0 and edit VMnet0 to use the connection you want:
11.33.31_inline.png)
For some reason I am not able to connect v2110's esa0. But in the same config I was able to use C25. Must be some kind of vmware player config issue. Can you Pl post your switch config.
I haven't done anything special to connect the controller to networks.
The management port (network adapter in Settings) is connected to a Host-Only networking adapter (sorry, my Fusion is in Spanish...)
The esa0 port (network adapter 2 in Settings) is connected to a bridged network using one of the available Etehrrnet adapters
Here's the topology used
The management port (network adapter in Settings) is connected to a Host-Only networking adapter (sorry, my Fusion is in Spanish...)
07.54.21_inline.png)
The esa0 port (network adapter 2 in Settings) is connected to a bridged network using one of the available Etehrrnet adapters
07.54.39_inline.png)
Here's the topology used
08.01.12_inline.png)
