@agroszer Spotify Pie Chart wrote:
Hello,
AP230 has two ETH ports, someone please enlighten me what are they good for?
Could the AP230 be used as a repeater?
Two uplinks? With different configs?
Hello!
The AP230, like many access points, typically has two Ethernet (ETH) ports for flexibility in network setups. Here's a breakdown of their functions:
Dual Ethernet Ports:
- Uplink and Client Ports: One port is usually designated as the primary uplink to your network (connecting to your router or switch), while the other can be used for additional client devices, like computers or printers, which can help reduce wireless congestion.
- Link Aggregation: In some setups, the ports can be combined for higher bandwidth using link aggregation, depending on your network configuration and switch capabilities.
Repeater Functionality:
- The AP230 is primarily an access point rather than a repeater. However, some access points can be configured in a way to extend the network (similar to a repeater), but this depends on the specific features and configurations supported by the AP230. Check its manual to see if it supports such a mode.
Different Configurations:
- In some scenarios, you can configure the ports differently (e.g., one for VLAN traffic and the other for standard traffic) if the device supports such configurations. This can be useful in more complex network setups.