I have set my AP's to run at 17dBm power on wifi1.However, some of them are only running at 14dBm and some at 12dBm. As you can see from CLI output, ACSP is disabled. show acsp Interface Channel select state Primary channel Channel width Power ct...
@Sam Pirok I found this answer through google, and it seem to be a hazzle to find it in the menus, so here is a direct link to itextremecloudiq.com/#/tools/utilities/selectDevices/locateDevice
I just downgraded from 10.0r7a to 8.2.r4.It seems like the power is going up. Although I have not been onsite to actually confirm sending power has gone up. Power now shows 19dBm. But the reulatory limit doesn't specify spatial streams. Power in GUI ...
@Brian Powers Hope your great powers can help with this power output confusion... So I suppose the Regulatory limit means at *the current channel* ? My AP122 current channel set to 36AP122#show run | i "wifi1 radio channel"interface wifi1 radio cha...
Thanks, how can I see what maximum power is on AC? This documents only mentions transmit power on 802.11g...https://www.aerohive.com/wp-content/uploads/Aerohive_Datasheet_AP122.pdf
