Extreme Networks

Ivan_Ivanov · 02-26-2016

Hi, I use BD10808 v15.1 as VLAN agregation switch. On 60 SFP ports I receive 1800 VLANs and uplink them to one server port. To setup VMAN i use only : create vman sl1 configure vman sl1 add port 8:1-8:60 When uplink is connected to one of the SFP ...

Ivan_Ivanov · 03-02-2016

Hi EtherMAN, You are right about nuances, but also there are inanities. Config is just fine - all by book. All ports are untagged, working like charm until I do the following steps: - take the uplink fiber out; - put the fiber back, link to shy; - o...

Ivan_Ivanov · 02-29-2016

By this follow ups I try to be as much as possible helpful and objective to put this puzzle in order.

Ivan_Ivanov · 02-29-2016

Yes, the problem is alive and need solution other than changing the hardware. So far looks like firmware issue, but can't exclude hardware completely. I test this only on G60X, 10G6X and 10G2H cards. Next days will have in lab BD8890 and will see. Ha...

Ivan_Ivanov · 02-28-2016

Another workaround is to configure the vman (or 10G port) ethertype to another value and return back to required one.

Ivan_Ivanov · 02-27-2016

I did the following too: I put the uplink to one of the 1G SFP and one customer connects to xenpak on 3:4. dhcpclient didnt receive IP address until I changed primary ethertype from 0x88a8 to 0x9100. When I switch back the primary ethertype to 0x88a8...

Extreme Networks

User Statistics

User Activity

vlan agregation

RE: vlan agregation

RE: vlan agregation

RE: vlan agregation

RE: vlan agregation

RE: vlan agregation