for the precedence of rules, you may have a look at the following on the switch
Get the list of profile with show policy profile and get the PID [example 2]
X440G2-12p-10G4.35 # sh policy profile
|PID |Name |RS|PVID|CoS|MI...
not sure if that helps but the following command should remove warning messages when configuring EAPS [and the need to answer y/n] - which may solve your script issue all together?
configure eaps config-warnings off
I saw that happening once -
can you check that the time on both the EM VM and the analytics VM are close [or better synchronized]. (SSH to the VM's then issue "date"] - if this is not the case, re-run the date script again [/usr/postinstall...
per the userguide, it should work
##### using a 21.1 userguide [consult the userguide that is relevant to the release you are using]
• count countername—Increments the counter named in the action modifier.
• ingress—all platforms
as suggested in the link you reference :
- if you want to use an "egress" ACL, then you should create a meter and apply the meter as the action [method 1] -> as suggested by Jarek [you may not necessarily need the vlan-id condition]