Extreme Networks

ThorstenS · 06-28-2022

Hi,I´m trying to setup a AP310i-WR with static link-aggregation to a Dell Powerswitch N1548P. To secure the lag, I´ve enabled BPDU-Protection on the Dell Powerswitch.If I connect the Accesspoint only with one Port (ge1), it starts normally. If I conn...

ThorstenS · 07-15-2022

Hi,you can close this thread. The port-channel config was missing at the ap, due ge1 and ge2 were in bridge-mode. The behavior of BPDU-Protection on the Dell-switch was correct. 

ThorstenS · 07-08-2022

Hi Christoph,thanks for feedback. The accesspoint is controlled by VX-9000. LAG was configured by an external supporter, I can´t compare the config with the howto, because your link does not work.Btw, I´ve checked the traffic with wireshark and it se...

Extreme Networks

User Statistics

User Activity

Bridge bypass ge1 & ge2 AP310i-WR

RE: Bridge bypass ge1 & ge2 AP310i-WR

RE: Bridge bypass ge1 & ge2 AP310i-WR