Extreme Networks

Pedro_Rocha · 10-08-2024

Hi everyone,I have the following usernames on my VSP:VSP_YYYYY-CIS-1:1#sh cli username************************************************************************************Command Execution Time: Tue Oct 08 17:49:01 2024 WEST***************************...

Pedro_Rocha · 08-12-2024

Hi team,I have installed a wifi network on a warehouse with AP305C. But the customer wanted to use Aruba switches and now I have all the APs with the low power status.Can you explain what are the consequences of this issue?Thanks!

Pedro_Rocha · 05-16-2023

Hi Guys,I have a big project in hands consisting on providing wi-fi connectivity for a warehouse using DAS system from Home (kymata.it).On my previous projects the customer supplied the APs (Cisco) and took care of their configuration.Since on this p...

Pedro_Rocha · 02-24-2022

Hi guys,I have installed a XCC with version 05.46.03.0016.Suddently I noticed that all of my customers AP were showing Radio 2 off.I don't have anywhere in the configuration this option...

Pedro_Rocha · 12-07-2021

Hi guys,I'm having some dificulties upgrading x460 switches via XMC. The device i'm trying to upgrade is a single switch (not stack) but i get an error message saying that "all device in the stack must be using the same active partition. correct and ...

Pedro_Rocha · 10-09-2024

Hi @MJS it was not exactly the answer, but it actually helped.I didn't noticed that I had changed the default username for RW. So, I changed the default username for RW and then created a username with RWA levelusername readwrite level rw enable(then...

Pedro_Rocha · 10-08-2024

Thank you very much @Jan_Reister.I need to explain to the customer the importance of providing the correct power to the APs.

Pedro_Rocha · 05-29-2023

Hi Jan,Sorry for my late reply.What I have experienced from previous installations, is that you can have good RSSI, but the antenna should be at 7/8 meters from ground.Here in Portugal we had to adapt because normally we work at 12/14 meters. Normal...

Pedro_Rocha · 03-02-2022

Hi guys,Just for the guys who are following this thread.I had this problem on 2 controllers with different solutions. On one controller the problem was fixed by changing the channel width to 40mhz.On the other controller, I managed to fix this by rem...

Pedro_Rocha · 02-25-2022

Thank you for your help.I tried to open a case but unfortunately the service contract expired a couple of days ago...These are APs 310i so, Radio 2 is 2.5ghz. Anyway, its a problem 

Extreme Networks

User Statistics

User Activity

VSP - Delete default user, or change access level.

AP305c Power status low

AP310e and DAS antennas power tuning

XCC all APs with radio 2 off

Problems upgrading firmware via XMC

Re: VSP - Delete default user, or change access level.

Re: AP305c Power status low

Re: AP310e and DAS antennas power tuning

RE: XCC all APs with radio 2 off

RE: XCC all APs with radio 2 off