Extreme Networks

show configuration | include "tagged" P.S: the word mentioned after the include for which you want to grep is case sensitive.

Hi, Could you test it after initiating a ping between the switches. There should have been a ARP entry on the uplink for the IP to get populated in "show edp ports detail" output. Below is the sample output from my lab switch:

Hi, If you would want to know the neighbor switches IP address, then, "show edp ports detail" output will give you the IP.

Hi, With extreme it is only single MAC which you see in "show switch" output. All ports share the same MAC.

Below is the link to the KCS article explaining this feature: https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-command-to-restrict-unknown-unicast-flooding-during-EAPS-or-STP-failover