Hello Jitendra,
I hope the below article may help you for the same:
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-enable-trial-license/
Hello Jitendra Patel,
You can clear the license information by execute the below command:
#clear license-info
If the switch you are using is on a trial license, you will need to use an alternate command to clear license information on...
Hello Mohammed,
I think you are experiencing similar issue reported on the below article.
I hope this will help you to resolve this:
https://gtacknowledge.extremenetworks.com/articles/How_To/Multicast-Entry-not-Added-Hardware-Table-F...