I'm trying to setup SNMPv3 on an x450e-24p for remote monitoring. I've been able to get snmpv2 working but I'd like to encrypt this traffic as it does not go though a VPN to my PRTG server. I've tried falling the guides on the GTAC but so far I've ...
I'm trying to route multicast traffic across two vlans - "things" and "wifipr". I've tried looking up documentation on this and I'm not really finding anything that resembles my situation. I'm not really sure where to start. I've tried enabling RI...
I have a x450e-24p I picked up recently and am trying to configure it as my core switch. I have two Vlans, BNS-MGMT and BNS-Net, that need to communicate. I have tagged both vlan's but all ports are left untaghed. BNS-MGMT 10.1.20.1 tag 20 ...
I will add that 50.204.100.145 is the public IP (PRTG server) the traps need to go to. 10.1.20.1 gets nat'd by my firewall to a public IP set directly for the switch. ICMP and SNMP are the only allowed services and the rules are working. I verifie...
The LAN interface on the sonic wall is also left default. This means all LAN connections are trusted and allowed. There are no access rules limiting LAN clients. Also the rulebase defines that from any souce to any destination on LAN to LAN is allow...
Pala I see where your coming from with checking the routing table in the firewall. I haven't trunked the switch to the firewall and I'm trying to avoid that. I want to keep it configured as an edge device. The BNS-MGMT vlan exists only as a "wan" vl...
