Extreme Networks

pierluigi_tramo · 11-18-2014

I'd like to have x150 (XOS version 15.3.2.11) double tagging untagged frame, i.e. one port accepting VLAN untagged frames and the other either Ctag and Stag frames. I found in the XOS 15.3 User Guide that Double Tagging is supported with VMAN by the ...

pierluigi_tramo · 11-19-2014

I can confirm to everybody that the syntax is correct. Assuming "prova" to be the name of my vman, then the output of the autocomplete command, "?", after the keyword "untagged" is , i.e. no port-cvid is expected: * X150-001.1 # configure vman prova...

pierluigi_tramo · 11-19-2014

Hi. Yes, I add the vman stag properly. What is missing is the ctag. However, let me refocus you on the command above in the thread, which I rewrite for your convenience: "configure vman vman_tunnel_1 add port 1 untagged port-cvid port_cvid". Is this ...

pierluigi_tramo · 11-19-2014

The command: show version, gives the following answer on our equipment: ExtremeXOS version 15.3.2.11 v1532b11-patch1-2

pierluigi_tramo · 11-18-2014

Hi. The configuration you proposed is the same as mine, unless for the first command (enable jumbo frame). About the fourth command: configure vman vman_tunnel_1 add port 1 untagged yes, this work fine for me. The point is that I would have wanted h...

Extreme Networks

User Statistics

User Activity

VMAN+Double+tag feature

RE: VMAN+Double+tag feature

RE: VMAN+Double+tag feature

RE: VMAN+Double+tag feature

RE: VMAN+Double+tag feature