Hi
I have xos 16.1.3.6-patch1-8 on my summit670. Try to use meter as an ingress shaper to limit udp and icmp flood. Shaping seems to work but problem is with notification. As far as i tested, only syslog message works. Counters via cli still show 0,...
Hi,
On summmit X670-48x with 15.5.4.2 v1554b2-patch1-5 I have problem with meter, i try to limit icmp traffic but looks that ingress shaper doesn't work.
i see packets on counter icmp but i don't see any dropped packets. After the switch, on rout...
Hi,
I have typical one-tier MLAG/LACP scenario, on graph is in blue colour. Now i'd like to extend my existing MLAG - green lines. It's almost two-tier mlag but isc-1 and isc-2 are on the same port but as a different vlan. ISC-2 will be add on all u...
Hi,
Strange problem with packets loss. I have LAG on port 47-48 connected to 2 different switches with MLAG. I see problem only between pair:
src mac f0:1f:af:d7:b5:37 and dst mac 00:18:9d:08:c8:59 rest of traffic are ok.
Summit sees in f...
Hi,
There are 2 kinds of meters: defined by user and 15 predefined in system.
Traps, logs and port disable work only with predefined meter like "ingmeter0"
When i'm using my counter ie. meter_10_K counter in cli works but traps, logs and port disa...
Hi
I checked also Henrique advice, counter doesn't work in cli. Don't know the oid of this counter, mayby via snmp works.
# show meter "ingmeter0" out-of-profile global-count Global
Out-of-profile
Meter ...
It's not a bug. there are 2 kinds of meters: defined by user and 15 predefined in system.
Traps, logs and port disable work only with predefined meter.
# show configuration | include meterconfigure meter ingmeter0 committed-rate 10 Pps max-burst-...
now i have xos 16.1.3.6 patch1-8 on some test summit670 and some problem with this snmptrap. I have tried to set trap action in acl in global meter configuration but without success
# configure meter meter_1_K committed-rate 10 Pps max-burst-s...
Hi,
How you can get trap parameter ? Maybe in 16.x xos ? For now i have only 15.5.4.2
i try
Summit1.27 # configure meter meter_1_M committed-rate 1000 Kbps max-burst-size 2 Kb out-actions drop trap
...
