We have three no’ of AP out of 3 one them is 8533 and two of them are 7522E. Now all AP’s are having same firmware even though AP-7522E is not managing with VC(8533). Then we created auto-provision Policy to manage the AP with VC but AP is showing of...
We’ve created Captive Portal on the VC it’s username and password based authentication. If guest comes we would create user id & Pwd and same is given to guest to access our network. We have to restrict using one userid & pwd multiple user’s will be ...
Hi,
If we set the date & time manually also after sometimes it's getting changed.
When we use captive portal with time based authentication user are not able to connect guest SSID because
NTP Server issue.
CLI:-
ap7522-A038A0(config-device-74-67...
The customer wants to add up a few more AP with their existing network. They are having AP 6511 the one which we are going to suggest the model should support with Ap 6511 and also new ap's
Kindly let us know whether they can go with RFS 4010 contro...
1.It's Virtual controller based concept
2.I am not able to reach NTP server from VC
3.And Also If we change the date & time manually through CLI also after sometimes time is getting changed.
Whoever trying to connect VC or Slave AP those are getting IP but it’s not a Default VLAN range. There is no DHCP pool configured on Default VLAN. Hence, I have created the DHCP Scope for Clients in the VC. The user is getting IP even wired user also...
Here you go
1 - AP model
WiNG AP 7522E
2 - Firmware version
5.9.2.5
3 - I would gather this is a virtual controller deployment, please confirm
Yes, It's VC
4 - Is the VC or one of the APs acting as DHCP server?
Yee, DHCP is configured on the VC( If...
