ADSP 9.3 does have an Alarm under:
Platform Health>Platform>Redundant Power Supply Failure
If you have that enabled, ADSP can send an alert as configured (email, sendmail). It will also be in the Alarm tab in an Active state as long as one of the p...
Ah, I see now. The root of the issue appears to be your APs are unable communicate with a controller using MiNT on VLAN 67, but can on VLAN 1. I'd start drilling down into the wired network at this point.
Is the controller local or remote? If local,...
Do you have your tagged and untagged vlans defined on ge1?
interface ge1 switchport mode trunk switchport trunk native vlan 67 no switchport trunk native tagged switchport trunk allowed vlan 5,6,7,8... Just to make sure, you're also assigning...
