Hello,
I have an ap7522 that is adopted by a rfs4000 controller,but when I make
changes to the controller the ap does not take into account the changes.Best regards
Hello,
I would like create a tunnel L2TPv3 between a rfs4000 and ap7522 but when i type a command sh l2tpv3 tunnel vlanxxx in rfs4000 controller. The controller write a result "error:could not fetch L2TPv3 stats"
nobody have a solution
Best regards
Chris i don't know how APS getting adopted. When i connect the ap in the network, the controller see them, and ap take their config by default.
I modified the config of the ap, but they are no difference
yohan
!
! Configuration of RFS4000 version 5.8.4.0-034R
!
!
version 2.5
!
!
client-identity-group default
load default-fingerprints
!
ip access-list BROADCAST-MULTICAST-CONTROL
permit tcp any any rule-precedence 10 rule-description "permit all TCP traffi...
from the rfs4k
rfs4000-F9B7DD#sh adoption status
not adopted to any wireless controller
Adopted Devices:
---------------------------------------------------------------------------------------------------------------
DEVICE-NAME VERSION ...
