As described above we are trying to get the routes from BGP transmitted by ISIS to the rest of the network. This ofc works, however there is one major thing to take into consideration. We need to apply metrics / weight / cost / ... to the I...
We are trying to setup a L2VSN connection between VSP 4k switches and Alcatel Omniswitch 6860 series.
For what we can see we have tried all the settings possible, but the only thing we managed is that the VSP appeared in the LSDB of the Omn...
I am wondering if anyone here has experience with the following situation.
I have 2 VSP switches setup as a vIST cluster. Towards each of these VSPs I have a Juniper router which is running ISIS. The routers are interconnected as well which ...
I installed the OVA file and my XMC is upgraded to version 8.2.4.
The release notes indicate to follow the installation guide, but I cannot find it anywhere.
Anyone with the same problem or am I missing some links?
In order to go around a problem we would like to return the vlan names only instead of the name and the ID. This is possible with other radius servers, but I cannot locate it within Extreme Control.
Has anyone done this before using Extreme Control?
Thanks for the reply, but it does not quite help us out here.
What we need is filters that when we export a BGP route into ISIS we can add a metric. This metric is different based on the community that is attached to the BGP route.
So there is no way that this is going to work if I understand correctly?
Or in the future will be supported?
I thought I heard it somewhere that it was possible, that is why I am testing this currently.