Extreme Networks

Grud · 12-21-2020

Good afternoon. I have two switches connecting two vlans through a trunk port and in each vlans there is a computer and the computers communicate with each other. The switches have the openflow protocol enabled and communicating with a third computer...

Grud · 12-14-2020

Good afternoon everyone! I am new to working with Extreme equipment and I have a problem that I cannot identify, I create vlans following this guide (https://extremeportal.force.com/ExtrArticleDetail?an=000083610) and my vlans do not communicate with...

Grud · 02-22-2021

My question is how do I configure a switch to route packets in SDN using a controller? I saw that it has two modes of operation, one being hybrid and the other standard, which of the two modes is the most suitable for this? The controller I already h...

Grud · 01-31-2021

Good morning, sorry for the delay in the response. I'm studying Openflow to build a controller to work with a real switch, I've managed to make the controller work in a virtualized environment. I am currently trying to add a temporary license as the ...

Grud · 12-18-2020

Sorry for the delay in responding. After mentioning that ping is used with origin and destination by the switch, it is used to see if the internal routing is ok, I stopped a bit and redid the network configuration. I deleted everything, redid the vla...

Grud · 12-15-2020

I didn't know he had this, cool! Follow what you asked me to do. Thank you!

Grud · 12-15-2020

Here are some images showing the ping made by the switch, an image showing a machine on the vlan fox pinging the entire network and another image showing a machine on the vlan wolf pinging the entire network. Thank you!

Extreme Networks

User Statistics

User Activity

Doubts about Openflow configuration

Vlan comunications

Re: Doubts about Openflow configuration

Re: Doubts about Openflow configuration

Re: Vlan comunications

Re: Vlan comunications

Re: Vlan comunications