Hello Team,
How do I go about adding an IP on the Brocade?
When you create a Interface Ve, is that the same the address that is used when a VLAN is tagged? Is there any association with it?
Good Morning Team,
My Issue:
I have 2x Brocade 6470T Switches stacked.
Each switch is licenses with 8x 10Gbe ports licensed
rbridge-id: 11
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
10G Port Upgrade license
Feature name:PO...
Good Morning Mike,
I just wanted to follow up and thank you for such amazing support. The has been licensed, the interface is up,
I heard about how great the support is from this team, but to get this much color on an issue I faced for two days ...
Thank you Michael for your help. Your response time was amazing.
sw-psp-vcs-core01# show interface tengigabitethernet 11/0/46
TenGigabitEthernet 11/0/46 is up, line protocol is up (connected)
I found a port that was not being used and added it to...
Thank you for getting back to me. If I don't want to use that port as a 10GB port, is it not possible to use it as a 1GBe port instead?
48 10G ports are available in this switch
4 40G ports are available in this switch
10G Port Upgrade licens...
Thank you.
sw-psp-vcs-core01# show interface tengigabitethernet 11/0/46
TenGigabitEthernet 11/0/46 is admin down, line protocol is down (no 10G Port Upgrade license)
Is the real issue. shut / no shut is not working.
