Hi,
I have 2 summit x450a that after they were reset to factory default the switches started up with blank configuration as can be seen from the attached sample below and except for vlan that I was able to configure every other c...
I have opened a case
it will not show even the simplest things
here is an example:
* X450a-24t.1 #
* X450a-24t.1 #
* X450a-24t.1 #
* X450a-24t.1 # sh configuration
#
# Module devmgr configuration.
#
#
# Module vlan configuration.
#
#
# Module ...
Thanks for the reply Robert, 2 additional ones did configure and save with no problem, these 2 do not show anything after configuration, sections keep showing empty
