Extreme Networks

HarrySo · 03-02-2021

I have a problem with getting a 10G SFP+ Adapter online. The SFP+ is plugged in a 40Gig Adapter. When i check the port in CLI Mode everything seems ok, but i can t get a link to the other switch.This occurs only in the X590 port 25-28, it works fine ...

HarrySo · 05-17-2018

Hi guys, we need some help! We have serious problems with our X690-G2 switches after enabling a udp policy. In the last weeks we had brought a bulk of x690 Switches to production with the same policy without any problems In this case we are using ...

HarrySo · 01-10-2017

In Ridgline we had an report called inacitive ports or similar. Does this feature exists in Netsight to?

HarrySo · 11-29-2015

In the last days i had a Problem with a suddenly reboot of one X450-48t Switch. Is this a Problem with the Firmware? The Switch was running about 900 days without Problems. We are using the ExtremeXOS version 15.3.1.4 v1531b4-patch1-19. Is an Upgr...

HarrySo · 07-07-2015

we have several LACP Lag's configured on our X670 Switches. In the Output of the command #Show lacp Counters i found something interesting on the ports 5+6 i've got a not so many "RX ok" then on the other configured Lag's, the difference is in fact ...

HarrySo · 05-17-2023

Hi, recently if found this. Hope it helpsMACsec performance - Cristian Sirbu (trueneutral.eu)

HarrySo · 03-02-2021

Thank you very much Stephen, I did not expect that there would be a hardware limitation

HarrySo · 05-17-2018

here the "show switch" output SysName: xxxx SysLocation: xxxx SysContact: xxx System MAC: 00:04:96:xx:xx:xx System Type: X690-48x-2q-4c SysHealth check: Enabled (Normal) Recovery Mode: All System Watchdog: Enable...

HarrySo · 01-27-2017

Hello Guys! We have the same Problem with our X620-16x switches running summitX-22.1.1.5.xos. A "restart process exsshd" does not help. SSH Login lasts 15-30 seconds

HarrySo · 01-10-2017

Thanks Karthik for this advice, but it dont work with our XOS devices. I know this tool from my early cabletron days. It seems that this will not work with summit Switches. There was a realy fine Report in Ridgeline included. You could see how Long t...

Extreme Networks

User Statistics

User Activity

Issue enabling 10 Gig SFP+ with 40G Module Adapter in X590

serious issue after enabling udp policy

Is there a possibility to see the inactivity duration from a Switch Port in Netsight for XOS Switches

Summit X450-48t suddenly reboots with Crit:Kern:Alert

LACP Counters, big difference between RX-Ok

Re: Extreme universal switch 802.1AE (macsec) question

Re: Issue enabling 10 Gig SFP+ with 40G Module Adapter in X590

RE: serious issue after enabling udp policy

RE: X670-G2 with EXOS 21.1.2.14: Establishing SSH session takes too long

RE: Is there a possibility to see the inactivity duration from a Switch Port in Netsight for XOS Switches