Hello Bryan,
You can absolutely have more than one (tagged) vlan per port, there is no need to remove any existing vlans.
This article from our KB explains how tagged and untagged vlans work in EXOS:
https://gtacknowledge.extremenetworks.com/artic...
Is the neighbouring device sending jumbo frames? If it is, and jumbo frames are not enabled on the receiving port, you will see Rx Over incrementing in this way.
This article from our KB explains how to enable jumbo frames and configure the MTU siz...
Hello Yusuf,
Essentially, all you need to do to initiate a broadcast storm is create more than one layer 2 path between 2 points in your network.
May I ask how you are using this for educational purposes?
Thanks,
Ash
To any potentially interested parties, please be aware:
https://gtacknowledge.extremenetworks.com/articles/Q_A/What-is-the-warranty-policy-for-grey-market
Have you visited our Knowledge Base Amam?
https://gtacknowledge.extremenetworks.com/
There are articles on there which will assist you in completing all manner of configurations within EXOS, including ELRP:
https://gtacknowledge.extremenetworks....
