Extreme Networks

Christian_K_ · 10-20-2022

we have to rollout a bunch of 5320 Switches to a new site , the customer want to manage the devices with xiq ..We have configured the switches prior with sharing ports for uplinks to central cores ..Now .. the switches appear into the xiq cloud , but...

Christian_K_ · 10-23-2020

Hello community,has anybody found a way to use a modern wireless controller like XCA or XCC with a client auth based on certifcates without using an NPS (we have dozens of ipad´s)I want to find a way where i can create a machine certificate on a syst...

Christian_K_ · 03-09-2019

I´m buidling a Netsight System with different locations. unfortuanally some locations using "wrong" Ip Addresses becaus of historical reasons ... its not possible to change these addresses becaus there are large networks behind them. The Problem is ...

Christian_K_ · 12-08-2018

We have an Extreme K6 System with a mix of X620 / K6 Switches. We have Advanced XMC / Netsight and we have implemented the analytics via a appliance. The core K6 sends packtes via netflow and a gre tunnel to the analytics appliance. Problem: we se...

Christian_K_ · 10-24-2020

Hello Mig, thx for the awnser, i don´t want to use NPS because the customer has a lot of IPAD´s and NPS is very focused on windows machines.I have EAC on the customer site and do LDAP Auth with this.Do you know a “how to” or “Step by Step” , to conf...

Christian_K_ · 03-09-2019

GTAC would be the second step .. i prefer first community way... i have better experiences with this as with GTAC

Christian_K_ · 03-09-2019

Hello Ronald, of course you are right. but we talk about mistakes a customer engineer did 25 years before .. and now you can not change the local ip network of an hospital with 3000 ip addresses... without a full shutdown or 100 day´s working Exam...

Christian_K_ · 12-09-2018

Hello Tomasz, i created the tunnel as suggested into some documents. Loopback interface loop.0.1 ip address 10.10.10.1 255.255.255.255 primary no shutdown Tunnel to analytics .. interface tun.0.1 tunnel destination 10.31.0.22 ...

Extreme Networks

User Statistics

User Activity

Bring running Switch config to XIQ ? is this possible

How to configure XCA or XCC to authenticate domain computers using certificates EAP-TLS

how to change country allocations

Fundamental Question to Analytics

Re: How to configure XCA or XCC to authenticate domain computers using certificates EAP-TLS

RE: how to change country allocations

RE: how to change country allocations

RE: Fundamental Question to Analytics