Hey everyone, as you guys may saw the X435 switch does have SFP uplinks which (according to the datasheet) are working with 1G or 2.5G. Has anyone of you ever seen a compatible 2.5G SFP module? It seems like these modules are available nowhere. ...
Hi Fredrik, I have tested this on several VSP4900s (which are identically to the X465). However I do not use Windows - I use a Mac and it did recognize the serial chip without adding any drivers or what so ever. It popped up as a new USB to serial ad...
Thank you very much! I haven’t seen this setting before This is very nice to know that you can also bind a supplemental CLI to each AP individually.Can you combine both settings, i.e. have a supplemental CLI for the whole network policy and also one...
@reinhardg thank you for your hint! Good to see that it is possible to enable 802.1X via supplemental CLI commands on an AP. I will try this in my test lab in the next few days to verify if that works However with supplemental CLI we can only push ...
Probably that needs to be set through a supplemental CLI command Maybe someone of Extreme (or former Aerohive) could help with pointing us in the right direction.I would be surprised if the XIQ APs could not do that on their ethernet ports... Kind ...
Hi Stephan, I would like to know this as well. IdentiFi APs have been able to do this and could authenticate themselves on their wired port by 802.1X PEAP or EAP-TLS but I haven’t seen any possibility on XIQ APs to do the same… Kind regardsChristian
