I think it is working as expected. though hosts are in different VLAN they belong to same VTN so they are pinging each other.
To Isolate hosts, You need to place them in different VTNs.
Hi Ankit,
From the above show openflow - (Total number of VLAN(s): 0), I could see that you have not enabled OpenFlow on ports/VLANs that connecting the switches that is the reason for not seeing the topology. Open Flow process processes the packet...
Communication between controller and switches is via Open Flow protocol. LLDP packets get encapsulated in Open Flow protocol and send to controller. So L2 switch is not a problem here.
Output of below commands from all switches may give idea on what...
There is no such restriction. ISC can be Static sharing and MLAG can be LACP or Static or mixed. On CLIENT also, you need to enable LACP sharing on ports connecting to both X670s
Example:
enable sharing 16 grouping 16,17 lacp
OVSDB works with AD-SAL only. Follow below steps to connect to OVSDB manager and to read/write data to it.
1. Configure OVS manager to listen in passive mode using below cli
sudo ovs-vsctl set-manager ptcp:6640
2. using RESTCLIENT, Connect ...
