Hi Joey,
The task "tipFdbAgeT' refers to IP FDB Aging Timer on Extremeware switches. You can clear the FDB table on Summit-200 to see if the CPU spike clears out which is probably due to software/hardware mismatch.
For these End of Life products, ...
Dave,
'force' option installs the new firmware without a version check. Please see the command details with example output for BD platforms.
http://documentation.extremenetworks.com/exos_commands_16/exos_16_2/exos_commands_all/r_install-firm...
if ...
Hi Daniel,
Yes, you can have ports from different slots as long as the ports are off the same speed ... you cannot mix 1G with 10G.
If the master port goes down, one of the member ports takes over the LAG mastership. So having one port go down in a...
Please see the link below:
http://documentation.extremenetworks.com/hw_sw_compatibility/hardwaresoftwarecompatibility/r_exos-re...
For 250e/450e, the latest recommended/supported version is EXOS 15.3.5.2-patch1-9.
If you have an active support co...
Please see articles:
https://gtacknowledge.extremenetworks.com/articles/Solution/EXOS-switch-Erro-HAL-Card-Error-poePlusI...
https://gtacknowledge.extremenetworks.com/articles/Solution/Summit-PoE-failure-and-switch-pass-exten...
PoE on the switch ...
