Extreme Networks

we recently decided to upgrade to exos 16.1.1.4. we have a variety of devices. x670, x460, x440, and x430-8p. We are using netsight 6.2.0.224. When using inventory manager to push software to the devices. the 16.1.1.4 is not listed as a option for th...

running netsight 6.2. I have a test switch summit 440 with 15.3.1.4 on both partitions. I added it to netsight and did discover. everything worked fine. I needed to test something on 15.5.2.9 patch 1-5. I pushed the firmware to the secondary partitio...

Summit 670 resets when we have a power outage. The device has two power supplies. Both of which are plugged in to separate UPS's. The logging on the UPS shows that that voltage levels never dropped below 118vac and the load on the UPS was constant. ...

I have a combination of 460/440s in my network. We have a data(computer) vlan and a phone vlan. Create vlan data tag 60 Create vlan phone tag 61 Conf vlan phone add port 4:21 tagged Conf vlan data add port 4:21 untagged configure lldp port 4:21...

We are running ELRP on all our ports. including the 10gig ports; that we use for our backbone. on stacks with the 460 48 port switches. We had a loop created when two switches were connected via 1gig ports ( ex stack 1 port 12 to stack 2 port . As e...