Extreme Networks

Magnus_Isaksson · 09-01-2017

Hello I'm quite new to Extreme and have yet some limited knowledge about XOS. But the story is that i have replaced our core router (X440-24t) with two "new" X440-24t in stack. Firmware version 16.2.2.4 as Extreme recommends for the X440. I have co...

Magnus_Isaksson · 09-01-2017

Thank you so much for your help!

Magnus_Isaksson · 09-01-2017

I did as you suggested, added an IP on VLAN401 and disabled port 1:1 Seems to work great now  I just did as they had done on the old switch, tho there was no stacking involved there. But the access to mgmt from all the IP:s configured on the switc...

Magnus_Isaksson · 09-01-2017

Yes, mgmt port is connected with a cable to port 1:1 on switch 1, but i did not do that to switch 2

Magnus_Isaksson · 09-01-2017

# sh vlan ----------------------------------------------------------------------------------------------- Name VID Protocol Addr Flags Proto Ports Virtual ...

Magnus_Isaksson · 09-01-2017

Hi both mac belong to stack-1 # sh stacking detail Stacking Node 00:04:96:98:04:b6 information: Current: Stacking : Enabled Role : Master Priority : Automatic Slot nu...

Extreme Networks

User Statistics

User Activity

Two X440 stacked random access to management

RE: Two X440 stacked random access to management

RE: Two X440 stacked random access to management

RE: Two X440 stacked random access to management

RE: Two X440 stacked random access to management

RE: Two X440 stacked random access to management