Extreme Networks

Currently we are using 36, 40, 44, 48 only under 5ghz radio with 40Mhz . Can I add 49, 153, 157, 161 also . . Deployment is huge around 850+ access points..... can i use 49, 153, 157, 161 in india.... we are planning to change 40mhz to 20Mhz/auto on...

End user says "Internet access is slow" , after connecting to Extreme 3805 AP and when connected to other extreme (altitude 4610) the internet access speed is better...... is "Flexi Client Access" a solution if end user has has slow network access.....

System has recovered from a possible loss of state synchronization with low-level session tables. Session tables have been re-synchronized and state re-established. If problem persists please contact technical support. What does this mean!

I See every time few ap's tunnel goes down frequently, is the MTU size the culprit , if yes what is the recommended value of MTU for Identifi 3805i Access Point. is there any global setting where all AP's MTU can be changed at a time.

User looses session with AP. Yellow exclamatory Mark Appears on Network Status. When I dis-associate the user from the AP, the user session again resumes normal......when this issue occurs user's ip address is not pingable from anywhere, user cant pi...