Extreme Networks

jacksonvld · 12-28-2020

Hello gentlemen,I need help from the most experienced.I have the following vlans configured on my core switch:1 - Default - 192.168.1.2/242 - IT - 172.17.41.1/243 - Fin - 172.17.36.1/244 - My Default gateway is 192.168.1.1 (My Firewall).I don't want ...

jacksonvld · 12-28-2020

Hello gentlemen,I need help from the most experienced.I have the following vlans configured on my core switch:1 - Default - 192.168.1.2/242 - IT - 172.17.31.1/243 - Fin - 172.17.26.1/244 - My Default gateway is 192.168.1.1 (My Firewall).I don't want ...

jacksonvld · 01-04-2021

I would not like to give the firewall the blocking function between vlans, but it seems to me that moving the vlan gateway to the firewall will be the best solution.

jacksonvld · 01-04-2021

Good morning Mig,Yes. I don't want to use ACLs. I would like the Switch to do all the routing, for example:- As I showed in the diagram. It is possible to make the IT VLAN use the default gateway 192.168.1.1?

jacksonvld · 12-29-2020

Good morning gentlemen,I understood your suggestion. I am looking for an alternative in which SWITCH CORE does all the routing without the vlan gateway on the firewall (tagged).When I enable ipforwarding, routing occurs as I would like, but the vlans...

jacksonvld · 12-28-2020

XCM8810.1 # sh config "vlan"## Module vlan configuration.#configure vlan default delete ports allconfigure vr VR-Default delete ports 1:1-48configure vr VR-Default add ports 1:1-48configure vlan default delete ports 1:1, 1:36, 1:41create vlan "Fin"co...

jacksonvld · 12-28-2020

They not able to access the internet.I need to avoid communication between IT and Fin vlans, but they must be able to go out to the internet.I deleted all the acls. It didn't seem like a good solution. I believe that the solution is routing. XCM8810....

Extreme Networks

User Statistics

User Activity

Vlan routing

Questions about vlan routing

Re: Vlan routing

Re: Vlan routing

Re: Vlan routing

Re: Vlan routing

Re: Questions about vlan routing