Hi Paul
Not sure if you have thought about this- You might consider moving ipforwarding and routing away from VPLS nodes, Your design remains the same, except you have another switch (or pair of switches for n+1 redundancy with VRRP) which does rout...
Ankit
Can you try enabling the following on the switch
configure openflow default-rule lldp controller
configure openflow default-rule miss controller
controller uses OF packet_in and packet_out messages to figure out the topolology. If the defa...
Hi
Check if NIC driver on server/PC has NIC teaming/Channel bonding support. This can typically be seen under "Device manager" if its windows server. You can create a NIC team with appropriate ports and enable LACP, then connect it to X670 that has...
