Hi!
I want create a LAG configuration, but i have some questions.
1. can i configure it using ports to diferent slots?
2. once configured if the master port pass to down state , everything LAG link is down?
Regards
Hi! I want to know if the next ACL can be simplified
entry VLAN_Admin_snmp {
if {
source-address 10.170.70.0/24;
protocol udp;
destination-port 161;
} then {
permit;
}
}
entry VLAN_Admin_snmptrap {
if {
source-a...
Hi! i need change authentication conection protocol in my WM3700 controlller...by default the controller have openSSL but i want to connect with TLS, this to mitigate the vulnerability VN-2016-007 (CVE-2016-2108)....
Hi! i need edit snmp config at the sw.
I have this configuration
"configure snmp access-profile snmp_access1 readwrite" and want chenge to readonly:
"configure snmp access-profile snmp_access1 readonly" but i see a CLI error:
Error: Please remove...
thanks guys!
so i can with a simple configuration? for example
SW1: enable sharing 5:1 grouping 5:2 6:1-2 algorithm address-based lacp
SW2:enable sharing 5:1 grouping 5:2 6:1-2 algorithm address-based lacp
