Extreme Networks

Swen_Wulf · 04-27-2020

Hello, I don’t see the 100G ER4 optics officially supported on the Extreme X870 or X590/690. Has anybody tried and could let me know about their experience?

Swen_Wulf · 05-24-2018

Hello, I though I would share my experience with trying to get a Extreme Networks switch and a Ciena switch to exchange CFM messages and be able to do delay and frame loss measurements. I am still having issues with the frame-loss testing, but delay...

Swen_Wulf · 06-06-2025

I am fighting the same thing right now. According to the Knowledgeable article, if the cam profile used is ipv4-ipv6, it does not support none default vrf. See here: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000122419&q=cam%20profiles...

Swen_Wulf · 04-27-2020

Hi Eric, as you said, it doesn’t create a loop. This happens on my network as well, customer is asking for separate circuits, each which its own handoff port on my Extreme switch and they all end up in a common switch of the client, bridging these se...

Swen_Wulf · 06-08-2017

Hi, I think a picture might help as well. See below. You basically define your third EAPS ring along the span Ring1B to Head Office and HeadOffice to Ring2B. As those are used by Ring1 and Ring2 as well, you will need to define these as shared ports...

Extreme Networks

User Statistics

User Activity

Extreme X870 or X590 support for 100Gbps ER4 40km QSFP28 optics?

CFM between Extreme Networks XOS switches and Ciena switches

Re: VRF traffic handling

Re: Stopping/Identifying inadvertently collapsed VLAN's.

RE: Two separate EAPS Domain Rings with one switch connected to both Rings.