Extreme Networks

Andre_Jordaan · 05-08-2023

iOS users can connect to a 802.1x SSID, but when roaming, most often fail to reconnect, Device GUI seems to connect and disconnect repeatedly. Roaming using Windows 10/11 seems fine as do Mac OSx (even if it can take a bit longer to reconnect.)Same d...

Andre_Jordaan · 09-25-2018

Running version 6.1.x at the moment on 8 x VSP 7200. In a Nutshell: Im testing an IDS solution and configured a monitor-by-isid (with QoS = 3) to copy traffic across the SPB cloud to the IDS. We noticed a massive increase (1ms to 300ms) in ping late...

Andre_Jordaan · 05-16-2023

Changing from 802.11 AX to 802.11 AC and disabling 802.11w on the SSID seems to make a difference

Andre_Jordaan · 05-08-2023

My guess is that its using defaults then.I set these using EIQ Cloud and looked at the config to find these and its also the AP410C. Not sure if you are using EIQ Cloud...

Andre_Jordaan · 05-08-2023

Hi There,Im no expert but have a look at:security-object <your ssid> security roaming cache update-interval 10 ageout 600 and / orssid <your ssid> client-age-out 15Good luck!

Andre_Jordaan · 10-22-2018

I have been running Fabric RSPAN now across the VSP7200 core for about a month without any problems. Key was to set a low QoS so as not to interfere with production traffic. Also, I split the monitor ports across two end switches (lower two in di...

Andre_Jordaan · 09-25-2018

Hi Rick, It might just be that the IP/ARP combo is still in cache. Try something like clear arp-cache on the VSP/ERS. Not sure which model you have so exact command might be different. Regards

Extreme Networks

User Statistics

User Activity

802.1X and iOS

vsp 7200 monitor-by-isid

Re: 802.1X and iOS

Re: Extreme Networks AP Caches Radius Clients

Re: Extreme Networks AP Caches Radius Clients

RE: vsp 7200 monitor-by-isid

RE: Moving VLAN address definitions from Cisco To VSP - Retire Cisco - Error: Mulitnetting Not Supported