Hello Mike,
This would only affect you if you were to configure a routed interface on a physical port. In most cases, you would want to create a vlan interface and use that for inter-vlan routing. In that case, snooping won't be disabled on any ph...
Hello Biggtimber,
I'm not 100% clear on the details of your setup, but the management interface does not do any routing. It can be thought of more like a client in VLAN 2 with a default gateway. In your setup, VLAN 90 is a routed interface. I bel...
Hello Robert,
I think a safer command to run would be:
set spantree portadmin [port-string] disable
The port will stop sending spanning tree BPDU and will ignore incoming BPDU. Doing this on individual ports rather than shutting down the entire s...
Hello Nachiket,
A VLAN interface should only go down when there are no ports in that VLAN that are in a forwarding state. We would need to know more about the topology and configuration on the switch to give a better assessment of how to prevent a ...
Hello Chris,
You can have a maximum of 4 mirrors active on a 200-Series at one time. Many-to-one mirrors are allowed, so the number of sessions that are active is dictated by the number of destination mirror ports have been configured.
For example...
