Hello,
This condition is usually seen when there are other mirrors already capturing the traffic or if the traffic is unidirectional. Are there any other mirrors configured on the switch including policy mirrors applied to this port or on any other...
Looking at the show port inline power things look like they should be working. At this point I would suggest collecting the output of the command "show support" and contacting the GTAC so we can dig a bit deeper to see if there is some other issue c...
Another question is what type of end device is this. To get into high powered mode some devices need LLDP configured with the PoE and med-poe TLV's enabled. Suresh's question about the ports inline power status though should be the first step as it...
Hello Andreas,
Route-Policies would be the way to go to filter advertisements to a specific peer. These two articles How to filter routes in BGP on EXOS Router and How to selectively advertise static routes via BGP show two different implementation...
Hello Matthias,
Being in a blocked state will prevent the switch from transmitting and have it discard any traffic that comes in. The exception to this is control frames such as STP where the frames are received and processed and the source MAC add...
