Extreme Networks

spurgelaurels · 10-10-2019

I'm really confused about this. When I set Native VLAN on the upstream port to VLAN 1, the APs get a 192 address (default for that vlan on the meraki dhcp server). If I set the Native VLAN to 20, they get a 172.20 address. All of this is entirely exp...

spurgelaurels · 10-10-2019

RIGHT, so I don't know why this is working now, but I changed the MGT VLAN to 1, did a full config update, set it back to 20, did a full config update.

spurgelaurels · 10-10-2019

AND just for fun, I configured the IP for AP-OFFICE to be static and set to 172.20.0.3 Reboots and stuff later, it's still grabbing a 192 IP address. I'm feeling like this machine isn't taking the MGT VLAN properly.

spurgelaurels · 10-10-2019

FROM AP-FRONT sho int mgt0Admin state=enabled; Operational state=up;DHCP client=enabled; Default IP subnet=192.168.0.0/255.255.0.0;IP addr=172.20.0.2; Netmask=255.255.254.0; Default Gateway:172.20.0.1;IPV6 address autoconfig enableIPV6 link local add...

spurgelaurels · 10-10-2019

And just for fun, here is some output from the other AP DHCP Tests performed for VLANs 20-20Passed VLANs: 20 172.20.0.0/23Status: complete

spurgelaurels · 10-10-2019

Yeah, there's a whole /23 for that VLAN, and barely 40 hosts on it. Output:DHCP Tests performed for VLANs 20-20Passed VLANs: 20 172.20.0.0/23Status: complete

Extreme Networks

User Statistics

User Activity

Native VLAN, Management VLAN, shouldn't be this messy...

Re: Native VLAN, Management VLAN, shouldn't be this messy...

Re: Native VLAN, Management VLAN, shouldn't be this messy...

Re: Native VLAN, Management VLAN, shouldn't be this messy...

Re: Native VLAN, Management VLAN, shouldn't be this messy...

Re: Native VLAN, Management VLAN, shouldn't be this messy...