My x670v seems to be stuck in a reboot loop. Extreme Networks Default BootLoader Image DRAM Post Press and hold the <spacebar> to enter the bootrom. Copyright 2003 - 2012 Extreme Networks, Inc. Loading OS Image ... Running Image ... Start...
I know this is an old switch, but some things are just agitating.
I have a port channel consisting of one port on each of two VDX-6720 switches in a VCS fabric.
sw0# show port-channel 10
LACP Aggregator: Po 10 (vLAG)
Aggregator type: Standard
Ig...
Where do I go for discussions\documentation\downloads for Foundry (or even Brocade) gear? Brocade sends us to Extreme's site and Extreme doesn't have anything useful to say about it.
When getting a redundant power box and modules for my Summit x400s, I see there are the regular power cords for the input to the module and something else for connection to the switches. What kind of connector\cable is that? Where can I locate one?
Here’s me trying the diagnostic mode, unsuccessfully. Still waiting to get software access so I can continue. Extreme Networks Alternate BootStrap Image Starting CRC of Default image Using Default image ... Extreme Networks Default ...
I’ve gone down that road to no success. Back to beating on my account manager to get me a quote for support so I can download the firmware. Press and hold the <spacebar> to enter the bootrom. Copyright 2003 - 2012 Extreme Networks, Inc. Loading...
I haven't called because I hate calling people on the phone for things and if Extreme now owns that portfolio, reaching out to Brocade doesn't make any sense.
However, I have done posted in their community and opened a support case with them, just a...
I didn't send any e-mails to create cases. I posted in the forum generically asking where to go and I opened a case through the website, providing equipment details.
You direct me to a Brocade site that tells me Brocade no longer handles the product...
