https://documentation.extremenetworks.com/networkos/SW/74x/nos-740-ipmulticast.pdf- Page 39IGMP configuration is not supported on VEs. IGMP configuration is supported only on VLAN, router ports and port-channels.You must enable snooping at the global...
The only thing I have seen close to what you are proposing was possible on the old chassis (8770) switches with multiple Management Modules. When you insert a secondary MM, the primary will "firmware level" the new MM. Once that is done you can tak...
FCOE stopped being supported as of NOS 7.3, so I would try removing the FCOE license:"license remove licStr FCOE_BASE"* You may or may not need to reload after this, if you still see the ports as all FCOE I would reload after removing the license.Reg...
"copy default start" and a reload should remove all configs from the device if it is a stand alone device.Regarding the boot error, I see several issues reported with this error that were fixed in the newer releases. Are you running an old version o...
