Here is an example of a master node when the ring is complete:Name: ed123a Priority: NormalState: Complete Running: YesEnabled: Yes Mode: MasterPrimary port: 56 Port status: Up Tag status: TaggedSecondary port: 2 Port status: Blocked Tag status: Tagg...
I guess you need to go to an H3C forum for this as you haven't even mentioned the Extreme config.Try ping 10.51.200.253 from the H3C to see if it has its own VLAN up and responding to ping. Do the same on the Extreme side (ping 10.51.200.254 to itsel...
Use "show ports statistics" instead. If the weather station only outputs very few packets, the "show ports util" will not reveal much. Look at the "packets" counters for RX and TX in the "statistics" command instead.
One thing you can try is to change the serial settings. The EXOS line of switches uses "no flow control". I'd say this is the normal config for switches, but it does sound like the flow control may be what is lacking. The most common type of flow con...
So, these are LAGs between the sites, right? What ring protocol do you use, EAPS, ERPS, STP or something else? Routed with IS-IS, OSPF or BGP perhaps?If this is EAPS (which it seems to be), there is no reason for the protocol to take down the ports. ...
