Hi,Trying to Upgrade IQ Engine and Extreme Network Switch Images --> Upgrade to the latest version (10.5r3) returns an error:Device Update Failed: The firmware about product type AP_122 and version 10.5.3.0 is not found
Can a cloud WIFI AP (i.e. AP305c) connect to XIQ using the default CAPWAP port UDP 12222 on Internet when the ISP is using CG-NAT?Is there any restriction in such environment?
1Gb copper SFP generates less heat than 10Gb copper SFP+.1Gb copper SFP has a power consumption of 1W while 10Gb copper SFP+ has a power consumption of 2.5W.I believe you don't have to leave empty slots when using 1Gb copper SFP.
Hello,No, that's not the solution.An update will revert your cli commands back. To make them permanent you have to use Supplemental CLI thru the XIQ Web interface, either at Policy level, AP template level or Device level. In any case, you have to ac...
Hi Giaco,Have you tried to create and activate an availability schedule Type Recurring, Every day, Start: 7:00 am, End: 1:00 am ?I can save that schedule but hasn't tested it.
Hi,ssh to one AP and enter the command:capwap client transport HTTPsave configThis will use TCP port 80 for capwap connection instead of UDP 12222. Check if you still see session disconnects.