The workflow will treat the email activity as one, it will not get instantiated against every device you run the workflow against.You probably need to store and consolidate the data retrieved from all the instances of the config activities, you would...
No issue on BCB switches. No issue on access switches that do not terminate the Anycast Gateway enabled L2VSNs. But if you are using NAC on the access switch, the VSN might get extended if the I-SID is RADIUS returned..
No, you need 9.1 or later on all the access L2 fabric nodes where you will be terminating L2VSN (VLANs) which are configured with an Anycast Gateway IP on the Core/Distribution nodes.If you have access switches with an older software version, and you...
Mgmt VLAN and Mgmt CLIP are both inband management options.If your switch is acting as a L3 Router for (some if not all) fabric services, use mgmt CLIP on it.If your switch is acting as a L2 access switch for all fabric services, use mgmt VLAN IP on ...
If your access switches are running SwitchEngine as FA Proxies, and you have VRRP with backup-master on the FabricEngine FA Server MLAG pair, then VRRP with Backup-Master is still perfect as you will get active-active load balancing of routed traffic...
