Thanks for sharing this, Stefan. The packet capture output is interesting, and I think the key point is understanding exactly where and how EXOS is capturing the traffic. If Wireshark is only showing a limited set of packets, it would be worth checki...
It sounds like the packet capture itself is working since you're able to open the PCAP in Wireshark, but the limited traffic suggests the capture point or filter may not be where you expect it to be. Himovies On EXOS, local packet captures can have c...
This is an interesting question because the built-in packet capture feature can be a bit confusing at first. If you're only seeing those packets in Wireshark, it may be related to the capture point, applied filters, or hardware offloading rather than...
Hi Stefan,It looks like you're only capturing control-plane traffic rather than the data-plane packets you're expecting. A few things you might want to check:Verify that you're capturing on the correct VLAN or interface.Make sure you've applied the a...
It sounds like you’ve successfully captured traffic, but what you’re seeing in Wireshark suggests the capture might be limited in scope rather than “full” packet visibility. EXOS GMovies packet capture is often interface- and filter-dependent, so if...
