I need to set up 2 summarized static multicast routes for 2 /16 networks. In Cisco the 'ip mroute' command is used. Is there something like that in NOS. I have searched the Command Ref guide and did not find anything
Craig,
If you have never configured or had the switch in production, you can install any version of code (provided the hardware supports it). You just do it as a new install. It is when the switch has a configuration on it, Extreme (Brocade) forced...
Laura,
I am the Lead Data Center engineer and am responsible for 3 large data centers that use the VDX platform and have done many upgrades over the years so I have a lot of experience doing what you need to do. We use all flavors of VDX including 8...
They usually come up with no issues. I would say its a 90/10 rule, 90% of the time they come up ok. If something happens and the fabric becomes segmented all you need to do is default the backup switch and when it reboots it will pull its config fro...
40G-QSFP-SR-BIDI - 40GE SR QSFP+ optic (LC), Bidirectional, 100m over OM3 MMF
40G-QSFP-QSFP-C-0101 - 40GE Direct Attached QSFP+ to QSFP+ Active Copper cable, 1m
40G-QSFP-QSFP-C-0301 - 40GE Direct Attached QSFP+ to QSFP+ Active Copper ...
