Extreme Networks

Nick_Datrix · 11-24-2020

Hi All Do you know the cli command for netsight appliance that can give me the serial no information of the appliance?Thanks a lotNick

Nick_Datrix · 11-17-2020

Hi All Something weird happened to me after have replaced a slot within a stack.The next day I got an alert on my monitoring tool that the firmware of the whole stack downgraded from from 2.0.2.3 to 2.0.2.1. The stack has 3 from x440-24p .Is that no...

Nick_Datrix · 11-13-2020

Hi AllWe are having LACP dropouts between PG650-3 + MP650-3 and the new Aruba distribution in PG + MP. It is showing up on PG650-3 more often than MP650-3 (remove port 24 aggregation) in logs. It is port 24 on both distribution switches. All physical...

Nick_Datrix · 07-01-2020

Hi All ON Extreme controllers is there a way of reporting the bandwidth per SSID ? Thanks Nick

Nick_Datrix · 11-24-2020

Hi MiguelThe problem is I cannot log in to XMC and I cannot open a GTAC case without those info. This is the issue that we are having we cannot log in to the XMC but the credentials are 100% correct.Any suggestions?Kind RegardsNick

Nick_Datrix · 11-17-2020

Stephan Already done this and customer is happy followed all the procedures  ThanksNick

Nick_Datrix · 11-13-2020

Hi ChrisCorrect about the port removed from aggregator in the log! Here is the lacp counters output;LACP PDUs dropped on non-LACP ports : 0LACP Bulk checkpointed msgs sent : 0LACP Bulk checkpointed msgs recv : 0LACP PDUs checkpointed sent : 0LACP PDU...

Extreme Networks

User Statistics

User Activity

XMC CLI COMMANDS

Firmware downgrade after replaced a stack

LACP check on PG650-3 + MP650-3

Wifi

Re: XMC CLI COMMANDS

Re: Firmware downgrade after replaced a stack

Re: LACP check on PG650-3 + MP650-3