I want to filter subnets with the same 3rd octet and different 2nd octet.
With Cisco i can use:
10.0.64.0 0.255.0.255
Is this also possible with EXOS?
Example:
seq 20 permit ip 10.0.64.0 0.255.0.255 any
Hello Mike,
Thanks for your fast reply.
Is i read in the EXOS guides it is not possible so i was looking for an alternative.
Now i only need to select the best switch/router.
I do not need a high end router.
24x 1Gbit ports are enough.
Any suggestion...
