Hello.
My name is Thiago dutra.
I have a problem in summit 300 48 - Extremeware.
In command show inline-power appears.
PoE firmware status : TPS version invalid -----> in ExtremeWare
The PoE is not work.
How I do to enable this firmware?
...
Hello Thavanami, I have the script of the configuration of the STPD. Do you question is about spanning-tree or STP ( Software of the inline-power - POE )?
Send my script of spanning-three.
create stpd EX: VLan: 2000 --> STPD_2000config stpd add v...
What problem friend!
There seems to be a loop topology, can be a loop on the door or a machine with a virus.
Once I shared the problem in such a network.
I had a machine that had a virus.
This virus was flooding the network with broadcast.
I took a o...
How is your topology?
If it is a ring, you will need a loop prevention protocol such as EAPS or ERPS Extreme.
The ERPS protocol there is the CFM, that work with switches that are not have ERPS.
Is very nice.
Hello,
You should segment the network.
Taking the cables on to one.
You will see if there is one problem in your network.
you have create one instance Spanning tree.
create stpd EX: stpd_S0
config add vlan ports dot1d
config tag
config m...
