Hi,Please open a case with Extreme Networks GTAC support for help troubleshooting this issue.Here are a couple of relevant articles:https://extremeportal.force.com/ExtrArticleDetail?an=000063581https://extremeportal.force.com/ExtrArticleDetail?an=000...
Hi,Unfortunately, there are no more HW Engineers for the T5 product available - it has been End of Lifed, so I have nobody to request that info from. However, I found an old email from an Engineer that may be useful.Take these measurements with TS52...
Hi,Yes, the T5 uses proprietary line-power to provide power to the remote TW-5XX wallplates. You need to use one of the T5 filters or a TW-5XX wallplate (it has a filter built in) between your butt set and the block.Part#s:552309-001-00 SPIDER FI...
Hi Alex,
The limit for wireless clients is configured per radio. The default is 64 and the max is 128.
Please make sure all CPEs have 5.4.2.2 firmware - mismatched firmware between T5 and CPE can cause odd behavior.
Have you recently made a change t...
Hi Vedran,
a) It appears you ran into a bug that is corrected in 5.4.2.2-003R firmware. That firmware is not yet available on the Extreme support site as it was just recently released. Please open a case so we can get you upgraded.
b) channel bondi...
