cancel
Showing results for 
Search instead for 
Did you mean: 

Sys-Health-Check BCM Counters have incremented on Unit 0 in Slot 1

Sys-Health-Check BCM Counters have incremented on Unit 0 in Slot 1

Abhijit_Kar
New Contributor
Hi team,
How to resolve this ?
1 REPLY 1

Gabriel_G
Extreme Employee

Hello,

You can check those counters via 'debug hal show sys-health-check'.

These counters usually indicate a hardware communication issue. 
I would look to reseat/reboot relevant slots to see if the counters stop.

If not, I would open a case with GTAC.

Hope that helps!

GTM-P2G8KFN